Home / Guide silicone for jewellery molding rubber FUSIMOLD®
SMFA | SMFN | SH38SR | SASR | STSR | |
Uso | -Standard pieces -High capacity of reproduction |
-Difficult pieces -Excellent capacity of reproduction |
-Minimum shrinkage -Vulcanizes at lower temperature -Lower hardness. Ideal for delicate models -Excellent capacity of reproduction |
-Minimum shrinkage -Toda clase de piezas -Vulcanizes at lower temperature -High capacity of reproduction |
-Minimum shrinkage -Difficult pieces -Vulcanizes at lower temperature -Excellent capacity of reproduction |
Colour | Yellow | Orange | Green | Blue | Translucent Very easy to cut |
Vulcanization temperature (ºC) | 160-170ºC | 160-170ºC | 80-100ºC | 80-100ºC | 80-100ºC |
Time (min X mm) |
2 | 2 | 2 | 2 | 2 |
Elongation (%) | 707 | 780 | 750 | 610 | 610 |
Tensile strenght (N/mm2) |
8,3 | 10,25 | 8 | 8,9 | 10,52 |
Tear strenght (N/mm) | 19,9 | 20 | 18 | 17,4 | 18 |
Finish | Very shiny | Very shiny | Very shiny | Very shiny | Very shiny |
Hardness Sh A | 46 | 45 | 38 | 46 | 43 |
Shrinkage | Minimum | Minimum | Minimum | Minimum | Minimum |
COPYRIGHT © 2023, FUSI-MOLD (TECNISIL VALLES S.L.) ALL RIGHTS RESERVED